|
BTA 4WD CENTRE - BALLINA, NSW. Current Category INTERCOOLER SYSTEMS Technical Information The Denco Intercooler system we use is a barrel liquid to air system to suit various diesel applications. Keep Your Aftermarket Accessories The efficient design of the intercooler kits we use mean common extras like bullbars, winches, driving lights and dual battery system can usually be kept, as some air to air systems are so cumbersome that common aftermarket extras as above must be deleted when the air to air intercooler is fitted. Test that have been carried out by Denco show that temperatures after intercooling with fully enclosed glycol intercoolers were around 20 degrees cooler than air to air methods tested. Better Looking Under bonnet appearance is enhanced by the polished aluminium finish. Less Volume Of Air To Charge Less plumbing is required than with air to air versions, meaning there is less air to charge the inlet system resulting in less lag. The straight flow through design minimises air pressure drop across the intercooler. Internal baffles in the liquid chamber maximise the heat exchange between the charge air and the glycol. An indpendent glycol filled system cools the charge air between the turbo and intake manifold. More Responsive At Low Speed As you may beaware an independent fan gives better response at low speed, at low speeds the electric fan pulls in air to cool the glycol system. As the vehicle speed increases, air speed enhances the cooling effect. A small but highly efficient separate radiator and fan run the intercooler liquid, therefore not contributing to the heat in your existing engine cooling systems.
|